×
Description
3670 005 0065 Stihl 71PM3 Picco Micro 3 Chainsaw Chain — 65 Drive Links Semi-Chisel Genuine OEM Part
The Stihl 71PM3 Picco Micro 3 Chainsaw Chain (65 Drive Links) is a genuine OEM replacement chain designed for Stihl chainsaws and pole pruners requiring a 12-inch bar with a 1/4" low-profile pitch and .043" gauge setup. Built with semi-chisel Picco Micro 3 cutters, this chain delivers smooth cutting performance, reduced kickback, and excellent durability for small to mid-sized saws.
The STIHL PICCO™ Micro™ 3 chain is ideal for saws in the 1.5–1.9 kW (2.0–2.5 bhp) range, offering easy maintenance and sharpening while staying sharper longer than full-chisel designs in normal use.
Product Details
-
Item Number: 3670 005 0065
-
Brand Compatibility: Stihl (OEM)
-
Chain Family: Micro
-
Chain Model: 71PM3 (Picco Micro 3)
-
Part Type: Chainsaw Chain Loop
-
Bar Length: 12 Inch (30 cm)
-
Pitch: 1/4" Low Profile
-
Gauge: .043" (1.1 mm)
-
Drive Link Count: 65 Drive Links
-
Cutter Type: Semi-Chisel
-
Cutter Sequence: Standard
-
Sharpening File Size: 1/8"
-
Condition: New Genuine OEM Replacement Part
Function
This chain is designed to:
-
Deliver smooth, narrow-kerf cutting performance
-
Reduce kickback for safer operation
-
Stay sharp longer than full-chisel chains in normal conditions
-
Provide easy maintenance and sharpening
-
Replace worn or damaged OEM chain loops
-
Perform best for pruning, trimming, and light-to-medium cutting tasks
⚠️ Semi-chisel chains cut slightly slower than full-chisel chains but are more forgiving and easier to maintain.
Verify Fitment in 30 Seconds
Before ordering, confirm the following on your guide bar or current chain:
-
Pitch: 1/4" Low Profile
-
Gauge: .043" (1.1 mm)
-
Drive Links: 65
-
Bar Length: 12"
⚠️ Model alone does not guarantee fitment — bar specifications must match.
Compatibility
Fits STIHL chainsaws and pole pruners using 1/4” pitch, .043” gauge, and 65 drive link chains, including:
-
MS 151 T C-E
-
MS 151 C-E
Battery & Top Handle Models:
-
MSA 160 T
-
MSA 161 T
-
MSA 220 T
Pole Pruners:
-
HTA 66
-
HTA 86
⚠️ Also fits other STIHL models that accept the same chain size and specifications with 12” bars.
Installation / Usage
-
Remove the old chain from the guide bar
-
Install the new Stihl 71PM3 Picco Micro 3 chain loop onto the sprocket and bar
-
Adjust chain tension properly (snug but movable by hand)
-
Lubricate with proper bar and chain oil
-
Test saw operation before pruning or cutting use
Maintenance Tips
-
Sharpen regularly using a 1/8" file
-
Maintain proper depth gauge settings for peak cutting performance
-
Keep chain tension properly adjusted
-
Clean cutters and drive links frequently
-
Lubricate with quality bar and chain oil
-
Replace chain if damaged or excessively worn
-
Store in dry, lubricated conditions to prevent corrosion
